n N

86

Using Peripheral Devices

To connect in STB mode (Option 2)

1Connect one end of the TV coaxial cable (1) (supplied) to your cable service access (wall outlet) (2). Connect the other end to the VHF/UHF IN jack on the back panel of your set-top box (STB) (3).

2Connect a second TV coaxial cable (4) (optional) to the VHF/UHF OUT jack on your STB unit (3). Connect the other end to the VHF/UHF port (5) on the rear of your TV monitor or display.

3Connect one end of a stereo A/V dubbing cable with triple RCA jacks (6) (optional), to the Composite Audio Out (L/R) jacks

(7) and the Video Out jack (8) on the back panel of your STB unit (3), matching the plug and jack colors.

4Connect the other RCA jacks of the stereo A/V dubbing cable (6) into the Composite Audio In (L/R) jacks (9) and the Composite Video In jack (10) on the A/V port replicator, matching the plug and jack colors.

Page 86
Image 86
Sony VGN-FS700 Series, VGN-FS600 Series manual To connect in STB mode Option