Sony VGN-FS700 Series, VGN-FS600 Series manual Using Your Vaio Computer

n N

42

Using Your VAIO Computer

Notes on writing data onto a disc

❑To make the data on a disc readable on an optical disc drive, you need to close the session when you eject it. To complete this process, follow the instructions included with your software.

❑Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc drive.

❑Do not strike or shake the computer while writing data onto a disc.

❑Deactivate the screen saver and exit anti-virus software before writing data onto a disc.

❑Do not use memory-resident utility software while writing data to a disc. This may cause the computer to malfunction.

❑When using your software application to burn discs, make sure you exit and close all other applications.

❑Never touch the surface of the disc. Fingerprints and dust on the surface of a disc may cause writing errors.

❑Do not switch power modes while using the pre-installed software and while using the CD burning software.

❑Never put stickers on discs. This will affect the use of the disc irreparably.

❑Connect and use the AC adapter to power your computer or make sure your battery is at least 50 percent charged.

❑Some DVD players and computer's DVD drives may not be able to play DVDs created by the VAIO Zone software.

✍

Ultra-speed CD-RW is supported on VGN-A700 Series models but not on VGN-FS600 Series models.

Supports writing to DVD-RW discs compliant with DVD-RW version 1.1/1.2.

Supports 8cm disc reading, but does not support 8cm disc writing.

Because the maximum writing speed to DVD+R DL (Double Layer) discs is 2.4x speed, it may take a while to finish writing to such discs. See the online Specifications sheet for more information on the optical disc drive.