Sony VGN-FS700 Series, VGN-FS600 Series manual Connecting with a cable or satellite set-top box STB

Models: VGN-FS600 Series VGN-FS700 Series

1 216
Download 216 pages 59.29 Kb
Page 84
Image 84

n N

84

Using Peripheral Devices

Connecting with a cable or satellite set-top box (STB)

You can connect your computer to cable service access that uses a set-top box (cable or satellite). When using the set-top box (STB) setup, you can only change channels through the STB, using its controls or supplied remote commander.

When using the STB setup:

A standard TV remote control cannot be used to change TV channels. You can use your TV remote control to set the TV to the channel-out number (channel 3, 4, etc.) or direct video input specified by your cable or satellite service provider.

You may be able to use a universal remote control or commander to change TV channels, if the device is able to control the STB.

Page 84
Image 84
Sony VGN-FS700 Series, VGN-FS600 Series manual Connecting with a cable or satellite set-top box STB