
Data Setting User Loading and Saving 7 Chapter
If you want to set a file ID for the data to be saved
Set the file ID before going to step 3.
For details on setting the file ID, see “Setting the file ID” on page 109.
3 Turn the MENU knob to move the b mark to “SCENE STORE”, and press the MENU knob.
F04 | SCENE FILE | TOP |
s1 | :STANDARD |
|
s2 | :STANDARD |
|
s3 | :STANDARD |
|
s4 | :STANDARD |
|
s5 | :STANDARD |
|
sSTANDARD |
|
| |
SCENE | RECALL | : | EXEC |
SCENE | STORE | : | EXEC |
F.ID: |
|
|
|
If no “Memory Stick” has been inserted, the SCENE STORE page appears.
|
|
|
|
|
| ?P00 SCENE STORE |
| ESC |
|
| DISPLAY MODE | : | ALL |
|
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
4 Select the desired file number.
When no “Memory Stick” has been inserted
Turn the MENU knob to move the b mark to the desired file number, and press the MENU knob. When the save is completed, the SCENE FILE page appears again.
When you select a file number where data has already been saved
The message “OVERWRITE OK? YES b NO” appears. In this case, the b mark is placed on the left of “NO”.
•To stop overwriting, press the MENU knob.
•To overwrite, move the b mark to “YES” and press the MENU knob.
When a “Memory Stick” has been inserted
You can use up to 20 pages, from P01 to P20, to save scene files in the “Memory Stick”. Each page can hold up to 5 files.
1Turn the MENU knob until the page which contains the desired file number appears, then press the MENU knob.
P01 SCENE STORE |
| ESC |
DISPLAY MODE | : | ALL |
001.SCENE1 FEB/05/02 002.STANDARD 003.STANDARD 004.STANDARD 005.STANDARD
***.5FILE SAVE
2Turn the MENU knob to move the b mark to the desired file number, and press the MENU knob. The message “STORE OK? YES b NO” appears.
P01 SCENE STORE | ESC | ||
STORE | OK? | YES | NO |
DISPLAY | MODE | : | ALL |
001.SCENE1 FEB/05/02 002.STANDARD 003.STANDARD 004.STANDARD 005.STANDARD
***.5FILE SAVE
3To carry out the storing, move the b mark to “YES” and press the MENU knob.
To cancel, press the MENU knob leaving the b mark pointing to “NO”.
You can select the contents of the user file to be displayed on the page.
For details, see “Selecting the display contents” on page 110.
5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
To return to the SCENE FILE page
After the message “COMPLETE” is displayed, move the b mark to “ESC” at the top right of the page by turning the MENU knob, then press the MENU knob.
White balance setting data to be saved in the scene fileThe white balance setting data to be saved in the scene file depends on the setting of the SCENE WHITE DATA item on the REFERENCE page of the FILE menu.
F05REFERENCE
REFERENCE STORE : EXEC
REFERENCE CLEAR : EXEC
REFERENCE LOAD : EXEC
REFERENCE SAVE : EXEC
F.ID: sssssssssssssssss
SCENE WHITE DATA:
OFF
108