Settings Detailed and Displays Menu 6 Chapter

The items selected for superimposed recording appear on the screen and are recorded superimposed on the color bars.

6-2-7 Setting the Shot ID

On the SHOT ID page of the USER menu, you can set a shot ID of up to 12 alphanumeric characters, spaces, and symbols.

When the OUTPUT/DCC switch is set to BARS, DCC OFF, this shot ID is output with the color bar signal. The shot ID comprises ID1 to ID4, and the setting can be changed using the SHOT DISP page of the USER menu. You can select the SHOT ID to be recorded superimposed on the color bars on the SHOT DISP page.

Note

When the menu is displayed, the shot ID is not displayed even if the color bar signal is output.

To set the shot ID, proceed as follows.

 

CANCEL/PRST /

 

ESCAPE switch

MENU knob

MENU ON/OFF switch

Setting the shot ID

1 Set the MENU ON/OFF switch to ON.

The last accessed menu page appears on the screen.

2 Turn the MENU knob until the SHOT ID page appears, and press the MENU knob to select the page.

U11 SHOT ID

TOP

ID-1 : ssssssssssss

ID-2 : ssssssssssss

ID-3 : ssssssssssss

ID-4 : ssssssssssss

3 Turn the MENU knob to move the b mark to the ID (one of ID-1 to ID-4) you want to set, and press the MENU knob.

A character table appears, allowing you to select characters you want to enter.

A x mark appears over the first character position in the string, and characters can now be input.

U11

SHOT ID

TOP

ID-1 :?x

 

ID-2

: ssssssssssss

 

ID-3

: ssssssssssss

 

ID-4

: ssssssssssss

 

$%&'()*+,-./0123456789: ;<=>?@ABCDEFGHIJKLMNOPQR STUVWXYZ[\]_

INS DEL RET

ESC END

4 Enter or change the shot ID.

When you are entering the whole shot ID, go to step 2.

1Turn the MENU knob to move the x mark to the character which you want to change, then press the MENU knob.

The x mark changes to a ? mark and a character table appears.

The x mark moves to the character table.

U11

SHOT

ID

TOP

ID-1

:?

x

 

ID-2 : ssssssssssss

 

ID-3

: ssssssssssss

 

ID-4

: ssssssssssss

 

x$%&'()*+,-./0123456789: ;<=>?@ABCDEFGHIJKLMNOPQR STUVWXYZ[\]_

INS DEL RET

ESC END

2Turn the MENU knob until the x mark moves to the character position that you want to select, then press the MENU knob.

Example: To input “+”

U11

SHOT

ID

TOP

ID-1

:?

+

 

ID-2 : ssssssssssss

 

ID-3

: ssssssssssss

 

ID-4

: ssssssssssss

 

x$%&'()*+,-./0123456789: ;<=>?@ABCDEFGHIJKLMNOPQR

STUVWXYZ[\]

_

INS DEL RET

ESC END

5 Repeat step 4 for each of the remaining characters.

6 When the input is complete, turn the MENU knob to move the x mark over “END”, then press the MENU knob.

This ends the input, and returns to the original SHOT ID page.

To insert a space

Proceed as follows.

90 6-2 Status Display on the Viewfinder Screen