Recording for Settings and Adjustments 5 Chapter

•The second top bar may turn on occasionally, but do not allow the top bar to go on. If it goes on, the audio level is too high.

Correspondence between recording level adjustments and audio level controls

In the AUDIO-3 page of the MAINTENANCE menu, you can select which audio level control controls the audio recording level of the front microphone input. The correspondence between the controls and the menu items and settings is as follows.

Level to be

Control

Menu item

Setting

adjusted

 

 

 

 

 

 

 

Channel-1

MIC LEVEL control

MIC CH1

FRONT

recording

 

LEVEL

 

LEVEL (CH-1) control

SIDE

level

(on the left)

 

 

 

 

 

 

 

 

 

 

LEVEL (CH-1) control

 

F+S1

 

is linked with MIC

 

 

 

LEVEL control.

 

 

 

 

 

 

Channel-2

MIC LEVEL control

MIC CH2

FRONT

recording

 

LEVEL

 

LEVEL (CH-2) control

SIDE2

level

(on the right)

 

 

 

 

 

 

 

 

 

 

LEVEL (CH-2) control

 

F+S1

 

is linked with MIC

 

 

 

LEVEL control.

 

 

 

 

 

 

Note

When you have operation of the MIC LEVEL control and LEVEL (CH-1/CH-2) controls linked together, if the LEVEL (CH-1/CH-2) controls are set to 0, the audio signals on channels 1 and 2 cannot be recorded. Check the position of the LEVEL (CH-1/CH-2) controls before adjusting the MIC LEVEL control.

5-5-3 Recording Audio on Channels

3 and 4

Selecting the recorded audio

You can select the audio recorded on audio channels 3 and

4with the AUDIO IN CH-3/CH-4 switches, or you can have the selection made automatically, as follows.

To automatically select the same audio as on channels 1 and 2

In the AUDIO-1 page of the MAINTENANCE menu, set the AUDIO CH3/4 MODE item to “CH 1/2”.

Adjusting the audio recording levels

In the AUDIO-2 page of the MAINTENANCE menu, set the AU CH34 AGC MODE item as follows.

For automatic adjustment: select “STREO” or “MONO”.

For fixed settings: select “OFF”.

Note

The type of audio recorded on audio channels 3 and 4 does not depend on the XLR connection automatic detection function. It is determined only by the switch settings.

F:The audio signal from the front microphone

is recorded.

R: The audio signal input to the AUDIO IN CH1 connector is recorded.

W: The audio signal of the wireless microphone is recorded.

F:Same as with the CH3 switch.

R:The audio signal input to the AUDIO IN CH2

connector is recorded.

W:Same as with the CH3 switch.

Audio signals to be recorded on audio channels 3 and 4

72 5-5 Adjusting the Audio Level