Data Setting User Loading and Saving 7 Chapter
|
|
|
|
|
|
| 04 SCENE FILE |
| TOP |
| |
| s1 | :STANDARD |
|
|
|
| s2 | :STANDARD |
|
|
|
| s3 | :STANDARD |
|
|
|
| s4 | :STANDARD |
|
|
|
| s5 | :STANDARD |
|
|
|
| sSTANDARD |
|
|
| |
| SCENE | RECALL | : | EXEC |
|
| SCENE | STORE | : | EXEC |
|
| F.ID: | SCENE21 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carry out the procedure from step 3 in
The set file ID is saved together with the data.
Selecting the display contents
You can select the items of file information to be displayed on the SCENE STORE pages (P01 to P20) or the SCENE RECALL pages (P01 to P20) used for saving data to or loading data from a “Memory Stick”.
For details, “Selecting the display contents” on page 106.
7-2-2 Loading Scene Files
Proceed as follows.
1 In the TOP menu, select the FILE menu.
2 Turn the MENU knob until the SCENE FILE page appears, then press the MENU knob to select the page. Alternatively, on the CONTENTS page select “SCENE FILE”, and press the MENU knob to display the SCENE FILE page.
3 Load the scene file.
To load the scene file stored in the camcorder
Turn the MENU knob to move the b mark to the desired file number, and press the MENU knob.
The s which is displayed on the left of the file number changes to x.
The camcorder is set up according to the loaded scene file.
04 | SCENE FILE | TOP | |
s1 | :SCENE | 25 |
|
x2 | :SCENE | 26 |
|
s3 | :SCENE | 27 |
|
s4 | :SCENE | 28 |
|
s5 | :NO FILE |
|
|
sSTANDARD |
|
| |
SCENE | RECALL | : | EXEC |
SCENE | STORE | : | EXEC |
F.ID: | SCENE21 |
|
|
To cancel the selected scene file
Move the b mark to x, and press the MENU knob. x changes to s.
The camcorder returns to the settings before selecting this scene file.
To load a scene file saved in the “Memory Stick” Proceed as follows.
1On the SCENE FILE page, turn the MENU knob to move the b mark to “SCENE RECALL”, and press the MENU knob.
The P00 SCENE RECALL page appears.
?P00 SCENE RECALL | ESC | |
DISPLAY MODE | : | F.ID |
MEM<1>:STANDARD
MEM<2>:STANDARD
MEM<3>:STANDARD
MEM<4>:STANDARD
MEM<5>:NO FILE
2Turn the MENU knob until the page which contains the desired file number appears, then press the MENU knob.
3Turn the MENU knob to move the b mark to the desired file number, and press the MENU knob.
The message “RECALL OK? YES bNO” appears.
P01 SCENE RECALL | ESC | ||
RECALL | OK? | YES | NO |
DISPLAY | MODE | : | ALL |
001.SCENE1
002.SCENE2 003.NO FILE 004.SCENE4 005.SCENE5
***.5FILE LOAD 
4 To carry out the recall, move the b mark to “YES” and press the MENU knob.
To cancel, press the MENU knob leaving the b mark pointing to “NO”.
When the loading is completed, the message “COMPLETE” appears. The camcorder is set up according to the loaded scene file.
If no file is present with a particular file number, this is shown as “NO FILE”.
5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
110