4 Remove the viewfinder cable and microphone cable from the clamps and disconnect them.
8-2 Adjusting the Viewfinder
Loosen the viewfinder left-right positioning ring.
Point the viewfinder barrel up or down.
1
2
3 Holding the viewfinder stopper up, slide the viewfinder in the direction indicated by the arrow and detach it.
8-2-3 Detaching the Viewfinder
Viewfinder stopper
Detaching the viewfinder

Camcorder the Up Setting 8 Chapter

8-2-4 Moving the viewfinder shoe up

1 Using a hexagonal wrench 2.5 mm across flats, remove the bolts (M3 ⋅ 25) and spring washers, to detach the viewfinder shoe from the camcorder body.

Viewfinder shoe assembly (A-8278-412-G)

2 Fit two of the four holes in the back of the viewfinder shoe over the upper two pins on the fixing plate. Make sure that the triangular mark on the viewfinder shoe is pointing up.

Pins

Fit these holes over

the pins.

Triangular mark

3 Using the bolts and spring washers removed in step 1, fix the viewfinder shoe to the camcorder.

116