Loading scene files from a “Memory Stick” into the camcorder memory

You can load up to five scene files stored in the “Memory Stick” into the camcorder memory in a single operation.

1 After displaying the SCENE FILE page (see page 109), turn the MENU knob to move the b mark to “SCENE RECALL”, and press the MENU knob.

A SCENE RECALL page appears.

2 Turn the MENU knob until the SCENE RECALL page which contains the desired scene files appears, then press the MENU knob.

3 Turn the MENU knob to move the b mark to “5FILE

LOAD b MEM 1-5”, and press the MENU knob.

The message “RECALL OK? YES bNO” appears.

 

 

 

 

 

 

 

 

P01 SCENE

RECALL

ESC

 

 

RECALL

OK?

YES

NO

 

 

DISPLAY

MODE

:

ALL

 

 

001.SCENE1

 

 

 

 

 

002.SCENE2

 

 

 

 

 

003.NO FILE

 

 

 

 

004.SCENE4

 

 

 

 

 

005.SCENE5

 

 

 

 

 

***.5FILE

LOAD

 

MEM1-5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 To carry out the recall, move the b mark to “YES” and press the MENU knob.

To cancel, press the MENU knob leaving the b mark pointing to “NO”.

When loading is complete, the message “COMPLETE” appears and the access indicator goes off.

5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.

Notes

•The scene files loaded from the “Memory Stick” overwrite data saved in the camcorder memory.

•To load the scene file saved in the camcorder memory when the “Memory Stick” is inserted, return to the P00 SCENE RECALL page and load the desired scene file in the camcorder memory.

•When there is no file to be loaded (shown as “NO FILE”), an existing file of the same number is unaffected. In the example shown in step 3, MEM(3) is not overwritten.

7-2-3 Resetting the Settings of the

Camcorder to the Standard

Settings Saved in the

Reference File

You can reset the settings of the camcorder to the settings saved in the reference file (standard settings).

For details about the items in the reference file, refer to the Maintenance Manual.

On the SCENE FILE page, turn the MENU knob to move the b mark to “STANDARD”, and press the MENU knob.

F04

SCENE FILE

TOP

s1

:SCENE

25

 

s2

:SCENE

26

 

s3

:SCENE

27

 

s4

:SCENE

28

 

s5

:NO FILE

 

 

xSTANDARD

 

 

SCENE

RECALL

:

EXEC

SCENE

STORE

:

EXEC

F.ID:

SCENE21

 

 

The s displayed on the left of STANDARD changes to x. When x changes to s, the settings of the camcorder are reset to the settings saved in the reference file.

If you press the MENU knob again while x is displayed, the operation is canceled and the camcorder returns to the settings before STANDARD was selected.

Data Setting User Loading and Saving 7 Chapter

7-2 Saving and Loading Scene Files

111