Settings Detailed and Displays Menu 6 Chapter
Item | Description |
|
|
CENTER | To display the center marker, set to ON. |
|
|
SAFETY ZONE | To display the safety zone, set to ON. |
|
|
SAFETY AREA | To select the safety zone range (80%, |
| 90%, 92.5 % or 95 %), when SAFETY |
| ZONE is set to ON. |
|
|
ASPECT | To display the aspect marker, set to ON. |
|
|
ASPECT | To select the type of the aspect marker. |
SELECT |
|
|
|
ASPECT MASK | To make the areas out of the selected |
(4:3)1) | aspect marker dimmer, set to ON. |
ASPECT MASK | To set the mask level (1/2, 1/4 or 1/8), |
LVL | when the ASPECT MASK is set to ON. |
|
|
100 % MARKER | To display the effective pixel area, set to |
| ON. |
|
|
1)The ASPECT MASK item is for processing the signal to be output to the viewfinder. When R, G, or B is selected for the TEST OUT SELECT item from the menu, the same video signal is output to the viewfinder and the TEST OUT connector. Thus, when the ASPECT MASK (4:3) item is set to “ON” with R/G/B selected, the masked video signal is output to the TEST OUT connector.
3 Perform the settings for each item.
1Turn the MENU knob to move the b mark to the item you want to set, and press MENU knob. The b mark on the left of the selected item changes to the z mark and the z mark on the left of the setting changes to a ? mark.
2Turn the MENU knob to change the setting, and press the MENU knob.
The z mark on the left of the selected item changes to a b mark and the ? mark on the left of the setting changes to a z mark.
4 To continue setting other items, repeat step 3.
5 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.
The menu disappears from the screen, and the display indicating the current status of the camcorder appears along the top and bottom of the screen.
6-2-5 Setting the Viewfinder
Use the VF SETTING page of the USER menu to select items related to the viewfinder.
CANCEL/PRST /
ESCAPE switch
MENU knob | MENU ON/OFF switch |
1 Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2 Turn the MENU knob until the VF SETTING page appears, and press the MENU knob to select the page.
|
|
|
|
|
|
| U09 VF SETTING |
|
|
| |
| ZEBRA |
| : | OFF |
|
| ZEBRA | SELECT | : | 1 |
|
| ZEBRA1 | DET.LEVEL: | 70% |
| |
| ZEBRA1 | APT.LEVEL: | 10% |
| |
| ZEBRA2 | DET.LEVEL: | 100% |
| |
| VF DETAIL LEVEL | : | OFF |
| |
| VF ASPECT | : | AUTO |
| |
|
|
|
|
|
|
|
|
|
|
|
|
You can set the following items on the VF SETTING page.
Item | Description |
|
|
ZEBRA | Turns the zebra display on or off. 1) |
ZEBRA SELECT | Selects ZEBRA 1, ZEBRA 2 or BOTH. |
|
|
ZEBRA 1 DET. LVL | Adjusts the level of the zebra 1 (70%) |
| display. |
|
|
ZEBRA 1 APT. LVL | Adjusts the aperture level of the zebra |
| 1 display. (1 to 10 to 20) |
|
|
ZEBRA 2 DET. LVL | Adjusts the level of the zebra 2 (100%) |
| display. |
|
|
VF DETAIL LEVEL | Adjusts the sharpness of the |
| viewfinder |
| Turns the VF detail function on or off |
| and adjusts the level. |
|
|
VF ASPECT | Selects the viewfinder aspect ratio. |
| (AUTO/16:9) 3) |
1)When you use the viewfinder which is not equipped with the ZEBRA switch, turns the display on or off using this item. When you use the viewfinder with the ZEBRA switch, the most recent operation of the ZEBRA switch and this menu operation is effective.
2)The sharpness setting at the viewfinder does not affect the recorded image.
3)When the VF ASPECT item is set to “AUTO”, this is linked to the 16:9/ 4:3 selection on the FORMAT page.
When the VF ASPECT item is set to “16:9”, but “4:3” is selected on the FORMAT page, then it is not possible to mix the zebra display and marker display signals on the output signal from the TEST OUT connector.
3 Turn the MENU knob to move the b mark to the item you want to set, and press the MENU knob.
88