SLS: 1 FRAME

Example of viewfinder screen display for SLS setting operation

2 Turn the MENU knob clockwise or counterclockwise until the desired number of frames appears.

The number of frames can be set to values in the range 1 to 8, and 16. (1 frame nearly equals to 1/30 second (PDW-510/530) or 1/25 second (PDW-510P/530P)).

Changing the range of choice of shutter mode and speed settings

You can reduce the time required to select the shutter mode and speed by narrowing the choice of settings in advance. This can be done by using the SHT ENABLE page of the OPERATION menu.

Proceed as follows.

Note

The settings selected on the SHT ENABLE page of the OPERATION menu become invalid when the RM-B150 Remote Control Unit is connected to the camcorder.

MENU knob

MENU ON/OFF switch

Changing the range of choice of shutter mode and speed settings

1 Set the MENU ON/OFF switch to ON while holding down the MENU knob.

The TOP menu appears.

2 Turn the MENU knob to move the b mark to

OPERATION.

3 Press the MENU knob.

If this is the first time the OPERATION menu has been displayed, the CONTENTS page of the OPERATION menu appears. If the menu has been used before, the last accessed page appears.

4 If the CONTENTS page is displayed, turn the MENU knob to move the b mark to “SHT ENABLE”, then press the MENU knob to display the SHT ENABLE page.

If a different page is displayed, turn the MENU knob until the SHT ENABLE page appears, then press the MENU knob to select the page.

 

 

 

 

 

 

 

17 SHT

ENABLE

 

 

 

 

SHUTTER

SLS

:

ON

 

 

SHUTTER

ECS

:

ON

 

 

SHUTTER

1/100

:

ON

 

 

SHUTTER

1/125

:

ON

 

 

SHUTTER

1/250

:

ON

 

 

SHUTTER

1/500

:

ON

 

 

SHUTTER

1/1000

:

ON

 

 

SHUTTER

1/2000

:

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

(This menu display is for the PDW-510/530. For the PDW-510P/530P, “SHUTTER 1/60” is displayed instead of “SHUTTER 1/100”.)

5 Turn the MENU knob to move the b mark to the shutter mode or shutter speed you want, then press the MENU knob.

The b mark on the left of the selected item changes to a z mark and the z mark on the left of the setting changes to a ? mark.

6 Turn the MENU knob until “ON” appears, then press the MENU knob.

The z mark on the left of the selected item changes to a b mark and the ? mark on the left of the setting changes to a z mark.

To set another mode or speed, return to step 5.

Note that only the shutter speeds set to “ON” can be selected with the SHUTTER selector.

Recording for Settings and Adjustments 5 Chapter

5-3 Setting the Electronic Shutter

67