Settings Detailed and Displays Menu 6 Chapter

OFF switch is set to OFF (when the cover of the menu operating section is closed, OFF is automatically selected).

By pushing the STATUS ON/SEL / OFF switch up to ON/SEL, the confirmation window appears. Each time you push this switch up to ON/SEL, the window switches. After 10 seconds, the window disappears automatically.

To make the window disappear promptly after displaying the window, push this switch down to OFF.

To disable display of the status confirmation windows

Proceed as follows.

1 Set the MENU ON/OFF switch to ON.

The last accessed menu page appears on the screen.

2 Turn the MENU knob until the SET STATUS page appears, and press the MENU knob to select the page.

U13 SET STATUS

 

 

STATUS

ABNORMAL

:

ON

STATUS

FUNCTION

:

ON

STATUS

AUDIO

:

ON

You can set the following items on the SET STATUS page.

Item

Description

 

 

ABNORMAL

Selects whether or not the ABNORMAL

 

window is displayed (ON or OFF).

 

 

FUNCTION

Selects whether or not the FUNCTION

 

window is displayed (ON or OFF).

 

 

STATUS AUDIO

Selects whether or not the STATUS

 

AUDIO window is displayed (ON or

 

OFF).

 

 

3 Turn the MENU knob to move the b mark to the item you want to set, and press MENU knob.

The b mark on the left of the selected item changes to a z mark and the z mark on the left of the setting changes to a ? mark.

4 Turn the MENU knob to select whether or not to display the selected window, then press the MENU knob.

The z mark on the left of the selected item changes to a b mark and the ? mark on the left of the setting changes to a z mark.

5 To continue setting other windows, repeat steps 3 and

4.

6 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section.

6-2-9 Confirming the Image of the

Return Video Signal in the

Viewfinder

You can set whether or not the image of the return video signal input to the GENLOCK IN connector is displayed in the viewfinder, using the GENLOCK page of the MAINTENANCE menu.

Proceed as follows.

1 Set the MENU ON/OFF switch to ON while holding down the MENU knob.

The TOP menu appears.

2 Turn the MENU knob to move the b mark to “MAINTENANCE”, then press the MENU knob.

If this is the first time the MAINTENANCE menu has been displayed, the CONTENTS page of the MAINTENANCE menu appears. If the menu has been used before, the last accessed page appears.

3 If the CONTENTS page is displayed, turn the MENU knob to move the b mark to “GENLOCK”, then press the MENU knob to display the GENLOCK page.

If a different page is displayed, turn the MENU knob until the GENLOCK page appears, then press the MENU knob to select the page.

92 6-2 Status Display on the Viewfinder Screen