Settings Detailed and Displays Menu 6 Chapter

The z mark on the left of the selected item changes to a b mark and the ? mark on the left of the setting changes to a z mark. The setting is confirmed.

8 To continue setting other items in the same page, repeat steps from 4 to 7.

To cancel a change or return to the standard settings

Proceed as follows.

1 Before pressing the MENU button in step 7 of the above procedure, push the CANCEL/PRST / ESCAPE switch up to the CANCEL/PRST position.

Under the page name, a message “CANCEL DATA OK?” appears.

2 Push the CANCEL/PRST / ESCAPE switch up to the CANCEL/PRST position once more.

A message “CANCEL DATA” appears to indicate that the change has been canceled.

3 To return to the standard settings, push the CANCEL/ PRST / ESCAPE switch up to the CANCEL/PRST position.

A message “PRESET DATA OK?” appears on the screen.

4 Push the CANCEL/PRST / ESCAPE switch up to the CANCEL/PRST position once more.

This returns to the standard settings.

Depending on the setting item, in some cases only the function to return to the standard setting is valid. Check this for each individual item.

To move to another page

Proceed as follows.

1 Turn the MENU knob to move the b arrow to the page number, then press the MENU knob.

If the b mark is placed at a position other than the page number, push the CANCEL/PRST / ESCAPE switch to ESCAPE.

A ? mark appears in front of the page number. The camcorder is now in page selecting mode.

2 Turn the MENU knob until the desired page appears.

3 Press the MENU knob when the desired page appears.

To end menu operations

You can end menu operations using the following two methods:

•Turn the MENU ON/OFF switch to OFF.

•Close the cover of the menu operating section. When you close the cover, the MENU ON/OFF switch is set to

OFF automatically.

The menu disappears from the screen, and the display indicating the current status of the camcorder appears along the top and bottom of the screen (when the viewfinder DISPLAY switch is set to ON or the VF DISP item on the VF DISP 1 page of the USER menu is set to “ON”).

For details of the viewfinder display , see 6-2-2 “Selecting the Display Items” on page 85.

6-1-4 Editing the USER Menu

The USER MENU CUSTOMIZE menu allows you to configure a USER menu that consists only of pages and items that you need by adding, deleting or replacing the pages.

Adding a new page

The USER MENU CUSTOMIZE menu allows you to add a new page to the USER menu.

While the EDIT page contains factory-preset items, the USER 1 EDIT to USER 19 EDIT pages and the ASSIGN SEL EDIT page are all blank in their initial state. You can register up to 10 items, including blank lines, on each of these pages.

To add a new page, proceed as follows.

1 While holding down the MENU knob, move the MENU ON/OFF switch from the OFF position to the ON position.

The TOP menu appears.

2 Turn the MENU knob to move the b mark to “USER MENU CUSTOMIZE”, then press the MENU knob.

If this is the first time the USER MENU CUSTOMIZE menu has been displayed, the CONTENTS page of the menu appears.

 

 

 

 

 

 

U00 CONTENTS

TOP

 

 

01.EDIT

PAGE

 

 

 

02.USER

1

EDIT

 

 

03.USER

2

EDIT

 

 

04.USER

3

EDIT

 

 

05.USER

4

EDIT

 

 

06.USER

5

EDIT

 

 

07.USER

6

EDIT

 

 

08.USER

7

EDIT

 

 

09.USER

8

EDIT

 

 

10.USER

9

EDIT

 

 

 

 

 

 

 

 

 

 

 

80 6-1 Menu Organization and Operation