For Machines Mfg. Since 3/11 | I N T R O D U C T I O N |
Carriage Feed Clutch Knob
X
Figure 6. Adjustable carriage feed clutch knob.
X.Carriage Feed Clutch Knob: Adjusts how easily the carriage clutch will disengage automatic feeding when the carriage contacts a feed stop or in the event of a crash. Tightening this knob all the way disables the carriage clutch completely.
Tailstock
Z | AA | AB |
|
Y
AD
AC
Figure 7.
Tailstock controls.
Y.Quill: The quill has an MT#5 taper, metric and inch scale, and a drift slot to remove
Z.Quill Lock Lever: Secures the quill in position.
AA.Tailstock Lock Lever: Secures the tailstock in position along the bedway.
AB. Tailstock Handwheel: Moves the quill toward or away from the spindle. The graduated dial has 0.001" increments with one full revolution equaling 0.200" of quill travel.
AC. Tailstock Gib Screws: Adjust the tapered gib to control tailstock offset accuracy.
AD. Tailstock Offset Screws: Adjust the tailstock offset left or right from the spindle centerline.
AE
AF
AH
AG
Figure 8. Tailstock controls.
AE. Tailstock Clamp Bolt: Adjusts the clamping pressure applied by the tailstock lock lever.
AF. Offset Scale: Indicates the relative distance of tailstock offset from the spindle centerline.
AG Offset Lock Bolt: Clamps together the upper and lower halves of the tailstock after the offset is adjusted.
AH. Tailstock Stop Pin: Prevents the tailstock from sliding off of the ways.
