5Package

5.1 Package supplied

When you order aSERVOSTAR 600 series amplifier (order numbers ðp.117), you will receive:
— SERVOSTAR 6xx
— mating connectors X3, X4, X0A, X0B, X7, X8
The mating SubD connectors and motor connector X9 are not part of the package!
— Assembly, Installation and Setup Instructions (product manual)
— Online documentation on CD-ROM
— Setup softwareDRIVE.EXE on CD-ROM
Accessories:(must be ordered separately; description see accessories manual)
— AC synchronous servomotor (linear or rotary)
— motor cable (pre-assembled), or both motor connectors separately, with motor cable as a
cut-off length
— feedback cable (pre-assembled or both feedback connectors separately,
with feedback cable as length
— Power supply for encoders with a power consumption of more than 150mA (ðp.113)
— Terminating adapter for encoders with no terminating resistors (ðp.113)
— motor choke 3YL for cable length above 25m
— external regen resistor BAR(U)
— communications cable to the PC(ðp.69)or Y-adapter (ðp.84) for setting parameters of up
to 6 servo amplifiers from one PC
— power cable, control cables, fieldbus cables (as lengths)

5.2 Nameplate

The nameplate depicted below is attached to the side of the servo amplifier.
The information described below is printed in the individual fields.

14 SERVOSTAR®601...620 Product Manual

Package 07/2007 Danaher Motion

Typenbezeichnung
Spannungsversorgung
ModelNumber
PowerSupply
Ser.Nr
Nennstrom
Ser.No.
Nom.Current
Bemerkung
Schutzart
Comment
Encl.Rating
DanaherMotion GmbH
Wacholderstr.40-42
D-40489Düsseldorf
www.DanaherMotion.com
CustomerSupport
Europe Tel.+49 (0)203 / 99790
Italy 3 36 594260Tel.+ 9(0) 2/
NorthAmerica Tel.+1 540 633 3400
Umgebungstemp.
Ambienttemp.

E217428

1VD4
LISTED
IND.CONT. EQ.
CUS
UL
®
example
example
Hardware
Revision
CommentsSerial number
Servo amplifier type
max. ambient
temperature
Output current
in S1 operation Hardware Revision
Enclosure Rating
Electrical supply
Installed load