6Technical description

6.1 The SERVOSTAR 600 family of digital servo amplifiers

Standard version
l6 current ratings (1.5 A -Europe only-,3A,6A,10A,14A,20A)
l3 instrument widths : 70 mm for 1.5A up to 10A rated current
100 mm for 14A rated current
120 mm for 20A rated current
lWide range of rated voltage (3x208V–10% to 3x480V +10%)
lShield connection directly at the servo amplifier
l2 analog setpoint inputs
lIntegrated CANopen (default 500kBaud), for integration into CAN bus systems and for
setting parameters for several amplifiers via the PC-interface of one amplifier
lIntegrated RS232, electrically isolated, integrated pulse-direction interface
lSynchronous servomotors, linear motors and asynchronous motors can be used
Electrical supply
lDirectly off grounded 3 phase system,
230V-10%... 480V+10%,50Hz,
208V-10%... 480V+10%,60Hz
TN-system or TT-system with grounded neutral point, max. 5000 rms symmetrical amperes.
Connection to other mains supply networks only with insulating transformerðp.48
lB6 rectifier bridge, directly off 3-phase earthed (grounded) supply system, integral power input
filter and inrush circuit
lSingle-phase supply (e.g. for setup) is possible
lFusing: (e.g. fusible cutout) provided by the user
lShielding: All shielding connections directly on the amplifier
lOutput stage: IGBT- module with isolated current measurement
lRegen circuit: withdynamic distribution of the regen power between several
amplifiers on the same DC bus link circuit. Internal regen resistor as
standard, external regen resistors if required
lDC bus link voltage 260 — 900 VDC, can be switched in parallel
lInterference suppression filter for the supply input (to category 3) is integrated
lInterference suppression filter for the 24V aux. supply (to category 3) is integrated
Integrated safety
lSafe electrical separation to EN 50178 between the power input / motor connections and the
signal electronics, provided by appropriate insulation/creepage distances and complete electri
-
cal isolation
lSoft-start, overvoltage recognition, short-circuit protection, phase-failure monitoring
lTemperature monitoring of servo amplifier and motor
(when using our motors with our pre-assembled cables)

16 SERVOSTAR®601...620 Product Manual

Technical description 07/2007 Danaher Motion