Star Micronics 150 Printable Area, Receipt/Journal Paper, Receipt Printing, Lines per inch lpi

General Specifications	PcOS Series 150	Programmer's Guide
Receipt/Journal Paper
Paper-feed method	Friction feed
Paper-feed pitch	Default - 0.13 inch (1/8 inch or 3.18 mm); can be set in units of
	0.0046 inch (1/216 inch or 0.12 mm) by software command
Paper width	2.75, 3.00, or 3.25 inches (69.85, 76.20, 82.55 mm)
Roll diameter	3.50 inches (88.90 mm)
Paper thickness at 25 °C
Two-ply	0.006 - 0.007 inch (0.15 - 0.18 mm)
Three-ply	0.009 - 0.0105 inch (0.23 - 0.27 mm)
Roll paper core	Inside diameter 0.44 inch (7/16 inch or 11.11 mm)
Roll footage (typical)
Two-ply	110 feet (3353 cm)
Three-ply	70 feet (2134 cm)
Receipt-paper out	Paper exhaust is sensed by software, and printing is prevented at the
	end of the roll.

Printable Area

Receipt Printing

Paper tear-off

1.00 inch (25.4 mm)

2.34inches (59.44 mm)

3.25inches (82.55 mm)

0.46 inch (11.68 mm)

Figure 4 Receipt printable area

Receipt Printing with the Autocutter

The paper is cut one inch from the last line of print, which minimizes the wasted paper required when the paper must be moved to the cut-off position.

Validation Forms Printing

Lines per inch (lpi)	Lines
8	16
6	12

Table 4 Validation lines

Page 10 Rev G 12/14/99