Star Micronics 150 manual Rotated print, Graphics

Programmer's Guide			PcOS Series 150		Control Codes
				Summary by Function
[ESC]	W <n>	1BH,57H	&%FS {n=0}	Set multiline double-wide double-		34
			&%FD {n=1}	high sequence.
			&%FH {n=3}	n=0 end all
				n=1 double-wide
				n=2 double-high
				n=3 both
[ESC]	_ <n>	1BH,5FH	&%CO {n=0}	Set overscore.		36
			&%MO {n=1}	n=0 end
				n=1 begin
			Rotated print
[ESC]	P <n>	1BH,50H	&%RF {n=1}	Rotate font.		23
			&%RI {n=2}	n=0 normal
			&%RN {n=0}	n=1 rotated 90°
				n=2 rotated 270°
[ESC]	r <n>	1BH,72H	&%R0 {n=0}	Rotate print.		41
			&%R1 {n=1}	n=0 end
			&%R2 {n=2}	n=1 rotate by 90°
			&%R3 {n=3}	°
				n=2 rotate left 180
				n=3 rotate by 270°
[ESC]	s <n>	1BH,73H	&%RL	Set rotated print line length.		43
			<m1><m2><m3>	n=1..128 (Default 80)
[ESC]	u <n>1	1BH,75H	&%RS	Set rotated print line spacing.		44
	<m>1			nk=0 End where n=line and
	<n>2			m=dots from last line.
	<m>2 ...			Note: All lines not specified are set
	<n>k <0>			to 1 dot.
			Graphics
[ESC]	* <m>	1BH,2AH		Print Epson 9-pin graphics in mode		46
	<n>1			<m>.
	<n>2
[ESC]	?	1BH,3FH		Reassign graphic mode.		46
	<m><n>
[ESC]	K <n>1	1BH,4BH		Set single-density graphics.		45
	<n>2			n1=0..255
				n2=0..3
				len=n1 +256*n2
[ESC]	L <n>1	1BH,4CH		Set double-density half-speed		45
	<n>2			graphics.
				n1=0..255
				n2=0..3
				len=n1 + 256*n2
[ESC]	Y <n>1	1BH,59H		Set double-density full-speed		45
	<n>2			graphics.
				n1=0..255
				n2=0..3
				len=n1 +256 * n2
[ESC]	Z <n>1	1BH,5AH		Set quad-density full-speed		45
	<n>2			graphics.
				n1=0..255
				n2=0..3
				len=n1 +256 * n2
[ESC]	U <n>	1BH,55H	&%GU {n=1}	Select bidirectional/unidirectional		47
			&%GB {n=0}	mode.
				n=0 bidirectional
				n=1 unidirectional

12/14/99 Rev G Page 87