Programmer's Guide

PcOS Series 150

General Specifications

Validation - Top Insertion

4.25inches (min) (107.95 mm)

First line of print

2.85 inches (72.39 mm)

Last line of print

0.68 inch (17.15 mm)

2.34 inches

(59.44 mm)

0.50 in

(12.70 mm)

2.50 inches (min) (63.50 mm)

Figure 5 Validation print – top insertion

Validation - Left-side Insertion

First line of print

Last line of print

2.34 inches

(59.44 mm)

6.00 inches (min) (152.40 mm)

0.50inch

(12.7 mm)

2.50inches (min) (63.50 mm)

2.85inches

(72.39 mm)

0.68 inch (17.15 mm)

Figure 6 Validation print – left-side insertion

Validation Forms Insertion

Form insertion is from the top or the left side of the printer. Automatic form location is under software or firmware control. Character rotation under software control will allow check validation to appear right-side up when the check is removed.

12/14/99

Rev G

Page 11

Page 21
Image 21
Star Micronics 150 manual Validation Top Insertion, Validation Left-side Insertion