Star Micronics 150 manual Function Begin 270 rotated print

Control Codes	PcOS Series 150	Programmer's Guide
Rotated Print
Function	Begin 270° rotated print
ASCII	[ESC] r <3>
Hexadecimal	1BH 72H 03H
Decimal	<27> <114> <3>
IPCL	&%R3
EPOS	[ESC] T <1>
Description	Print data is entered normally from left to right, top to bottom. When an end
	rotated print ([ESC] r <0>) command is received, the printer formats and prints
	the data. The print will be rotated 270° according to the currently stored format
	parameters.
	EPOS Note: The Series 150 Printer does not implement EPOS page mode. The
	[ESC] T <n> command functions identically to the normal mode [ESC] r <n>
	except the definition of <n> is different.
Function	Begin 270° rotated print with line formatting
ASCII	[ESC] r <7>
Hexadecimal	1BH 72H 07H
Decimal	<27> <114> <7>
IPCL	&%R7
EPOS	[ESC] T <1>
Description	Print data is entered normally from left to right, top to bottom. When an end
	rotated print ([ESC] r <0>) command is received, the printer formats and prints
	the data. The print will be rotated 270° according to the currently stored format
	parameters. This command differs from the [ESC] r <3> command by spacing
	out the lines to the line length specified by the [ESC] s command. If input
	extends past the end of a line, it will line wrap.
Function	Begin 180° rotated print
ASCII	[ESC] r <2>
Hexadecimal	1BH 72H 02H
Decimal	<27> <114> <2>
IPCL	&%R2
EPOS	[ESC] { <1>
Description	All subsequent lines will be rotated 180° and positioned at the opposite margin.
	This command is effective on all stations including the journal. This command
	will remain in effect until rotation is canceled with an end rotated print ([ESC]
	r <0>) command, or a station select command is issued.

Note: The last line of print must be terminated with a line terminator before the end rotated command is issued. Any characters in the print buffer that have not been printed will not be printed. They will be printed unrotated when a line terminator is received.

Page 42 Rev G 12/14/99