Programmer's Guide

PcOS Series 150

Control Codes

 

 

 

Rotated Print

Function

End rotated print

 

ASCII

[ESC] r <0>

 

Hexadecimal

1BH 72H 00H

 

Decimal

<27> <114> <0>

 

IPCL

&%R0

 

 

EPOS

[ESC] { <0>

 

Description

In 90° or 270° mode, this command prints the contents of the rotated print

 

buffer

and returns to normal print orientation.

 

In 180° mode, the printer will return to normal print orientation. Characters in the print buffer that have not been printed will not be printed.

Function

Set rotated print line length

ASCII

[ESC] s <n>

Hexadecimal

1BH 73H <n>

Decimal

<27> <115> <n>

IPCL

&%RL <m1> <m2><m3>

EPOS

none

Description

This command sets the print line length to be used in autoformat rotated print

 

mode. The maximum number of characters is 128 per line. The power on

 

default line length is 80 characters.

 

The number of available print lines is found by dividing 1760 by the number of

 

characters per line and rounding down to the nearest whole number. The

 

minimum number is 80 characters. Any value less than 80 will not allow any

 

additional lines to be printed. Values greater than 80 will limit the number of

 

lines to less than 22.

12/14/99

Rev G

Page 43

Page 53
Image 53
Star Micronics 150 manual Function End rotated print