Star Micronics ND-10/15 user manual

it returns the print head to the left margin. It does not advance the paper (if DIP switch l-5 is on; see below).

Line feed is more complicated. Each time the printer receives a CHR$(lO) it both advances the paper one line and returns the print head to the left margin, ready to start a new line.

Now to add a little confusion-most (but not all) versions of BASIC add a line feed (CHR$( 10)) to every carriage return (CHR$( 13)) they receive. If your version of BASIC doesn’t do this, then you should turn DIP switch l-5 off so that your printer will add the line feed for you. When you have DIP switch l-5 off the printer will do the same thing when it receives a carriage return as it does when it receives a line feed.

In addition, when you are using the printer with the IBM-P mode, you can control these functions with control codes. The

<ESC > “5” 1 command sets the printer to add a line feed to every carriage return received. The < ESC > “5” 0 command cancels this function.

If you find that your printer double spaces when it should single space, then you probably need to turn DIP switch l-5 on.

nReverse line feeds

Your printer can move the paper up or down. The unique tractor design allows the paper to be fed in either direction without jamming. This allows you to move around the page at will. You can use this feature to print several columns of textsside by side, or to print a graph and then move back up and insert descriptive legends. As you experiment you’re bound to come up with more uses!

The simplest form of reverse paper feeding is a reverse line feed. The code is < ESC > < LF > , which causes the paper to move down (in effect, moving the printing up) one line. A “line” used in a reverse line feed is the same size as a line in a regular line feed (this is normally l/6 inch). When you change the line spacing (which you’ll read about next), both forward and reverse line feeds change.