Star Micronics ND-10/15 user manual Print

5

Print

Figure 1-5.To thread the ribbon, slide the print head carriage manually to the right or left, and the ribbon will slip down by itself into its proper position.

nInstalling the mute cover

The mute cover reduces the printer’s operating sounds.

Note the position of the guide pins on the mute cover as shown in Figure l-6. Holding the mute cover at each end, insert the guide pins into the cutout hooks on the printer cover. Hold the mute cover down onto the printer.

To remove it, reverse the procedure.

Mute cover

Figure 1-6.Install the mute cover by holding vertically, then lay down on the printer cover.