Star Micronics NX-1000 manual Semiautomatic loading

I

Figure l-7. Mounting the paper guide for single sheets

Semiautomatic loading

Single sheets can be loaded manually with power off, or semiauto- matically with power on. We will start the easy way with semiautomatic loading.

1.Check that the release lever is down and the bail lever back (bail closed), then switch power on. You will hear a short beep tone and the Power indicator on the control panel will flash. These are the printer’s paper-out signals.

2.Place a single sheet on the paper guide and insert it down into the entry slot. You will feel a slight resistance as the paper engages the paper detector lever. Work the paper past this resistance and insert it down as far as it will go.

3.Move the bail lever forward. When the bail opens, the printer feeds the paper automatically.

4.Move the bail lever back. The paper will feed slightly forward again, ending in position to print with a top margin of about one inch.