Star Micronics NX-1000 manual Line Feed

Line	feed
Mode	ASCII	Decimal	Hexadecimal
Both	<LF>	10	OA

Prints the current line and feeds the paper to the next line. If DIP switch l-2 is ON, also moves the next print position to the left margin. See the preceding commands for the line spacing.

Reverse line feed

Mode

Both

ASCII		Decimal	Hexadecimal
<ESC>	<LF>	27 10	1B OA

Prints the current line and feeds the paper in the reverse direction to the preceding line. If DIP switch l-2 is ON, also moves the next print position to the left margin. See the preceding commands for the line spacing. Ignored when friction feed is used.

Perform one n/2164nch line feed

Mode	ASCII			Decimal	Hexadecimal
Both	< ESC >	“J”	n	27 14 n	1B4A	n

Feeds the paper once by n/216 inches, where n is between 1 and 255. Does not move the print position right or left when DIP switch l-2 is OFF. Does not change the line-spacing setting. Ignored when friction feed is used.

Perform one nl2164nch reverse line feed

Mode

Both

ASCII			Decimal		Hexadecimal
c ESC >	“‘j”	n	27 106	n	1B6A	n

Feeds the paper once by n/216 inches in the reverse direction, where n is between 1 and 255. Does not move the print position right or left when DIP switch l-2 is OFF. Does not change the line-spacing setting. Ignored when friction feed is used.

Feed

paper

n lines

Mode

ASCII

Decimal

Hexadecimal

Both

<ESC>

“f’

“1”

n

27

102

49

n

1B

66

31

n

<ESC>

“f

<I>

n

27

102

1

n

1B

66

01

n

Feeds the paper n lines from the current line, where n is between 0 and 127.

72