Star Micronics NX-1000 manual Expanded Printing

Expanded		printing
Mode	ASCII				Decimal			Hexadecimal
Both	<ESC>	“w”	“1”	27	87	49	1B	57	31
	<ESC>	“w”	<I>	27	87	1	1B	57	01

Causes subsequent characters to be expanded to double width.

Cancel expanded printing

Mode	ASCII				Decimal			Hexadecimal
Both	<ESC>	“w”	“0”	27	87	48	1B	57	30
	cESC>	“W”	co>	27	87	0	1B	57	00

Stops expanded printing and returns to normal width.

Expanded printing for one line

Mode	ASCII		Decimal	Hexadecimal
Both	<so>		14	OE
	<ESC>	<so>	27 14	IB OE

Causes subsequent characters in the current line to be expanded to double width. Characters return to normal width after the next line feed ( < LF > ). The < DC4 >, < VT >, < FF > , and < ESC > “W” 0 commands also cancel expanded printing.

Cancel one-line expanded printing

c Mode ASCII Decimal Hexadecimal

Both <DC4>2014

L.	Stops one-line expanded printing set with < SO > or < ESC z < SO >.
	Does not cancel < ESC > “W” 1.

L	Select	proportional		spacing
c	Mode	ASCII				Decimal
	Both	< ESC >	‘1 n	“117	27	112	49
			P
L.		<ESC>	“P ”	Cl>	27	112	1
	IBM	<ESCz	“P”	cl>	27	80	I
L..		Causes	subsequent characters		to be	proportionally

the Print Pitch switch was pressed during power-up.

Hexadecimal

1B 70 31

IB 70 01

IB 50 01

spaced. Ignored if

67