Star Micronics NX-1000 manual Enable printing of all character codes, Select slash zero

The first eight of these character sets (from U.S.A. to Spain I) can be selected as power-up defaults by DIP switches 2-2 to 2-4.

Enable printing of all character codes

Mode	ASCII				Decimal	Hexadecimal
IBM	<ESC>	“\”	nl	n2	27 92 nl n2	IB 5C nl n2

Enables printing of all characters in the IBM character set, including those assigned to character codes which are normally considered control codes. This command remains in effect for the next nl + n.2 x 256 characters, where nl and n2 are numbers between 0 and 255. During this interval no control functions are executed. If a code with no assigned character is received, the printer prints a space.

Enable printing of a// character codes on next character

Mode	1	ASCII		Decimal	Hexadecimal
IBM	1	< ESC >	‘Ln”	I 21 94	tlB 5E

This command operates like < ESC > “\” except that it remains in effect for only one character.

Select slash zero

Mode	ASCII				Decimal			Hexadecimal
Both	<ESC>	“ _ 3.	“ 1”	1 27	126	49	IlB	7E	31
	<ESC>	“N ”	< 1 >	I27	126	I	1B	7E	01

Causes subsequent zero characters to be overprinted with a slash (0).

Select normal zero

Mode

Both

ASCII				Decimal			Hexadecimal
<ESC>	b‘N ”	“0”	21	126	48	IB	7E	30
<ESC>	“W”	<o>	27	126	0	IB	7E	00

Causes subsequent zero characters to be printed normally (0), without a slash.

65