Star Micronics NX-1000 manual Select character height, width, and line spacing

Select character height, width, and line spacing

Mode ASCIIDecimalHexadecimal

<ESC>		“[”	“@”	<4>	27 91	64	4	1B 5B	40	04
Both	<o>	<o>	<o>	n	0	0	0 n	00	00	00 n
		m			m			m

Selects a combination of character height, width, and line spacing ac- cording to the value of n and m, as below. Does not move the base line.

	Character height
	Unchanged
Unchanged	Single	height
Unchanged	Double	height
	Unchanged
	Single	height
	Double	height
Double	Unchanged

Single width (same as < ESC > “W” 0)

Double width (same as < ESC > “W” 1)

Double-height characters are always printed at near letter quality. Double height printing temporarily cancels the super/subscript and condensed printing modes, but these modes resume when the printer returns to normal height.

VERTICAL POSITION COMMANDS

Set line spacing to l/8 inch

Mode	ASCII		Decimal		Hexadecimal
Both t	<ESC>	“0”	1 27 48	IlB	30	-
	Sets the distance the paper advances or reverses in subsequent line feeds
	to l/8	inch.