Star Micronics NX-1000 manual Cancel immediate print, Set prinfer off-line, Set printer on-line

hrmediate print

Mode	ASCII			Decimal		Hexadecimal
Both	< ESC >	“i”	“ 1”	27 105	49	1B	69	31
	< ESC >	“i”	<I>	27 105	1	1B	69	01

Selects the immediate print mode, in which the printer prints each character as soon as received. At every pause in the incoming data stream the printer scrolls the paper up about 2 inches so that the current line can be seen. When the next character is received the paper is scrolled back down and printing continues. This command is ignored when friction feed is used.

Cancel immediate print

IModel	ASCII			I	Decimal		I Hexadecimal			I
Both	< ESC >	‘5”	“0”	27	105	48	1B	69	30
	< ESC >	“i”	co>	27	105	0	1B	69	00

Cancels the immediate print mode. The printer waits for each line to be completed before printing it, and does not scroll the paper up and down. This command is ignored when friction feed is used.

Set prinfer off-line

Model	ASCII		Decimal	Hexadecimal		1
Std.	<DC3>		19	13
IBM	<ESC>	“Q” <3>	27 81 3	1B	51 03

Sets the printer off-line. The printer disregards all subsequent characters

and commands except i DC1 >, which returns it to the on-line state. The printer’s On Line indicator does not go off.

Set printer on-line

Mode	ASCII	Decimal	Hexadecimal
Both	<DCl>	17	11

Returns the printer to the on-line state, allowing it to receive and process

all subsequent characters and commands. This command is ignored if the printer was set off-line by pressing the On Line switch on the control panel.