Star Micronics NX-1000 manual Graphics Commands, Absolute horizontal tab in columns

Absolute horizontal tab in columns

Mode 1 ASCIIDecimalHexadecimal

<ESC>	“f’	“0”	n	27	IO?	48	n	1B	66	30	n
Both	“f	CO>	n	27	102	0	n	1B	66	00	n
<ESC>
Moves	the next	print	position	to column		n from		the left	margin,		where

n is between 0 and 127.

GRAPHICS COMMANDS

Print sing/e-density &bit graphics

	Modt ?I ASCII				I	Decimal	I	Hexadecimal	I	-	-
	<ESC>	“K”	nl	n2	27	15 nl n2	1B	4B nl n2
	Both		m2		ml m2		ml m2
t	ml

Prints bit-image graphics at 60 dots per inch horizontally. The graphic image is 8 dots high and nl + n2 x 256 dots wide. Maximum width is 8 inches (480 dots). ml, m2, ... are the dot data, each a l-byte value from 0 to 255 representing 8 vertical dots, with the most significant bit at the top and the least significant bit at the bottom. The number of data bytes must be nl + n? x 256. Dots beyond the right margin are ignored. At the end of bit-image printing the printer returns automatically to character mode.

Print double-density &bit graphics

Mode ASCIIDecimalHexadecimal

<ESC>	“L”	nl	n2	27	76	nl n2	1B	4C nl n2
Both				ml	m2	..	ml	m2
ml		m2

Prints bit-image graphics at 120 dots per inch horizontally (maximum 960 dots wide). See < ESC > “K” for other information.

-

Print double-density, double-speed 8-bit graphics

Mode	ASCII				Decimal			Hexadecimal
Both	<ESC>	“Y”	nl	n2	21	89 nl	n2	1B	59 nl n2
	ml		m2		ml	m2	.	ml	m2

Prints bit-image graphics at 120 dots per inch horizontally (maximum 960 dots wide), skipping every second dot in the horizontal direction. See < ESC > “K” for other information.

80