Instruction Manual
scanned computers must also be eye mark selected. Scan Rate (<F4>: More\Scan Rate) sets the display interval when a computer is selected before selecting the next one.
Manual Scan
Scans through powered computers using keyboard control. Scan Type (<F4>: More\Scan Type) determines if scanned computers must also be eye mark selected. Press the up arrow key to select the previous computer and the down arrow key to select the next computer. Press any other key to abort the Manual Scan mode.
Scan Type
Ready PC + Eye: In Scan mode, scans through only powered computers that are eyemarked selected.
Ready PC: In Scan mode, scans through all powered computers. The
Eye Only: In Scan mode, scans only computers that have been eye- marked.
Scan Rate
Sets the duration of a computer displayed in Auto Scan mode. The op- tions are 3 seconds, 8 seconds, 15 seconds and 30 seconds. The Scan Rate setting is stored in
Hotkey Menu
When you hit the left <CTRL> key twice within two seconds, the Hotkey Menu appears displaying a list of
CH Display
Auto Off: After you select a computer, the channel address and name of the computer will appear on the screen for 3 seconds then disappear automatically.
Always On: The channel address and name of a selected computer and/or OSD status displayed on the screen all the time. The
Position
41
