Configuring a Newer AB OS/OA Device
When selecting a newer AB OS/OA device you will also need to enter in the IP Address for the blender. This IP is a fixed IP and must be unique for every device that resides on the same LAN (Ethernet Network). Some examples are: “192.168.0.10”, “192.168.0.1”, “192.168.0.2”, etc. You will also need to program the blender with the same IP address. Below is a the blender’s IP address and Subnet Mask under “Network Setup”:
Step 1: touch the AEC icon and enter your password
Step 2: touch “Network Setup”
Step 3: set appropriately
Page 68
