Page 71
Configuring an Older Proprietary OS/OA, OL, or OFC:
When selecting “Legacy Equipment with Hynet Driver,” you will be given a few extra
entries to complete:
Adding a Legacy Device
As you can see you will need to enter a unique “Serial ID” for each device on your
network. You will also need to configure the number of hoppers for the device (this is
only necessary on the older proprietary blenders). Leave the Polling Time at 100ms
and Maximum Resend Attempts at 10. To configure the Serial ID on the actual blender:
Step 1: From the main menu press “5” and enter in your password.