Page 67
Adding new A3 Device Objects
Simply right click in the blank white area of the sheet you wish to add a device to and
select “Add ACS Device”. You will then see the following dialog:
Add New Device Dialog
1. Edit the Device Name. Use whatever is appropriate for your blender.
2. Edit Device Description if desired. Any text that is entered here will “pop-up” when
the operator holds the mouse over the icon for the device. This is commonly known
as “Tool Tips” and can be used to give the operator location information of the
device.
3. Select the Device Type: OS, OA, OL, and OFC. A picture is given for help.
4. Select the Communications Type: AEC AB OS/OA blenders use the “OS2001
Blender (OS or OA) with AB Driver”, Older HydReclaim blenders and weigh hoppers
use the “Legacy Equipment with Hynet Driver”, and Sterling SGB blenders use the
“SGB Blender with Mitsubishi Driver”
5. Select which features you wish to enable for this device. These features are shown
in the “Available Features” box and are self-explanatory.