Operator Panel
5-8 Sixth Edition 95741
■Operator Panel
Note: The 9840 Tape Drive and CSL operator panel use small push-button
switches. The term switch or switches is used to identify them
throughout this manual.
The operator panel (Figure 5-7) allows a human interface to the subsystem. The
left half of the operator panel contains the indicators and switches specifically
for the 9840 Tape Drive.
The right half of the operator panel contains the indicators and switches
specifically for the CSL. They are:
•operator Indicator (6)
•system Indicator (7)
•automatic Indicator (8)
•manual Indicator (9)
•Start Switch (14)
•Autoload Mode Switch (15)
Note: Only the CSL indicators and switches are discussed in this section. Refer
to “Operator Panels” on page 1-7 for explanation of the 9840 Tape Drive
indicators and switches.
Figure 5-7. CSL Operator Panel
1. power indicator
2. activity indicator
3. clean indicator
4. service indicator
5. IPL switch
6. operator indicator
7. system indicator
8. automatic indicator
9. manual indicator
10. Unload switch
11. Menu switch
12. Select switch
13. Operator display
14. Start switch
15. Autoload Mode switch
Note: The IPL switch (5) only IPLs the drive. Use the Power switch on the back of the CSL to
IPL the CSL.
C53660
123 45 6
7
8
9
10 11 12 13 14 15