95741 Sixth Edition 5-29
Error and Recovery
4E23 CSL encountered an error during an
unload.
1. Check the CSL for any error
condition.
2. Remove the cartridge.
3. Press the Start switch once.
Note: LOAD 4E23 will
display until you press
the Load or Start
switch.
4E2D SCSI load command failed due to
the CSL no longer in the System
mode. The mode was changed
during the load.
Return CSL to System Mode.
4E31 SCSI load command failed due to
the CSL no longer in the System
mode. The mode was changed
during the load. This error occurs
immediately after a cleaning or
dump cartridge has just been
unloaded.
Return CSL to System Mode.
4E34 SCSI load command failed due to
no cartridge being available to load.
This error only occurs immediately
after a cleaning or dump cartridge
has just been unloaded and the CSL
is in the Automatic mode.
Load a cartridge.
Table 5-6. CSL FSCs
FSC Malfunction Fix