95741 Sixth Edition 7-5
Dislodge a Stuck Tape
CodUpFail3 The tape format is
unreadable.
Reclaim as a data tape, recreate code tape.
Retry the operation.
Try another tape.
Note: In code level 1.30.109 and up, error message is replaced by CHK xxxx.
CodUpFail4 This is not a code-update
tape.
Retry with the correct tape.
Note: In code level 1.30.109 and up, error message is replaced by CHK xxxx.
DatCrFail1 Unable to create (format) a
data tape.
Make sure the tape is write-enabled.
Try another drive or CSL.
Note: In code level 1.30.109 and up, error message is replaced by CHK xxxx.
DmpCrFail1 Unable to create (format) a
dump tape.
Make sure the tape is write-enabled.
Try another tape.
Try another drive or CSL.
Note: In code level 1.30.109 and up, error message is replaced by CHK xxxx.
DmpCrFail2 The tape format is
unreadable.
Reclaim as a data tape.
Retry the operation.
Try another tape.
Note: In code level 1.30.109 and up, error message is replaced by CHK xxxx.
DumpToHost The dump or event log is
being transferred to host; the
operator panel switches are
locked
No action necessary.
DmpWrFail1 Unable to write a dump to
tape.
Unable to position on tape.
Try another tape.
Make sure the tape is formatted for a
dump.
Note: In code level 1.30.109 and up, error message is replaced by CHK xxxx.
DmpWrFail2 No dump to process. Force a diagnostic dump.
Note: In code level 1.30.109 and up, error message is replaced by CHK xxxx.
DumpAgain? The drive or CSL detected the
same “CHK (xxxx)” within
one minute.
Go to “DumpAgain? Indication” on
page 7-12.
Exp ClCart The cleaning cartridge is used
up.
Replace the cleaning cartridge.
Table 7-2. Error Displays and Instructions (Continued)