95741 Sixth Edition 3-9
9738 Library Attachment
Prepare and Install the Drive
Use the instructions below to install the drive:
Note: It is assumed that the drive has been unpackaged per the instructions in
“Unpacking the Shipment” on page 3-2.
1. Inspect the target for damage (such as white scratched off the target).
a. If the target is damaged, obtain a replacement target (PN 300048901).
b. Remove the damaged target and snap the new one into the opening shown in the
figure below.
Note: The drive ships with the target installed in the bezel.
1. Library horizontal target
2. Remove the shipping insert from the drive bezel by squeezing both sides of the handle
together and pulling it out from the drive (see figure).
1. Shipping insert
C5334
7
1
C53218
1