Drive Operations Menu
6-40 Sixth Edition 95741
Servo Load/ Unload Diagnostic Submenu
SrvoLdUnld Servo Load/ Unload Diagnostics
test the drive servo load/unload
function.
A tape cartridge, if present,
ejects when this option is
selected.
Make sure a scratch tape
cartridge is available. Tape
cartridge loading is required for
the diagnostic, but the tape
media is not used.
TestSrvLdU displays during
the approximately 1 minute
routine
(10 load/unload cycles).
If CHK xxxx displays, see FSC
Dictionary for information.
1. Press Menu to bypass, or
2. Press Select to activate.
3. When LdScrtchTp displays, insert
known good scratch tape cartridge.
4. If a diagnostic error FSC displays,
press Unload to clear.
5. When the tape ejects, press Menu to
advance to the Exit Drive submenu;
or, reinsert tape cartridge to repeat.
Exit Drive Submenu
Exit Drv ? This submenu allows you to
exit Drive Operations, or to
repeat the drive operations
submenus.
1. Press Select (Yes) to exit Drive
Operations, or
2. Press Menu (No) to loop back to
the Code Update Submenu.
Table 6-3. Menu Table—Drive Operations (Continued)
Options Notes Procedure