95741 Sixth Edition 3-47
Rack-mountable Tray
CAUTION:
Equipment damage. Do not force the fibre optic plug into the port connector.
7. Connect the Fibre Channel cable to the desired port on the rear of the tray.
Note: The connector is keyed so the cable can only be inserted one way.
CAUTION:
Cable damage. If slack is not maintained in the cable, the weight of the cable may
cause excessive stress at the cable connector.
8. Insert the cable into the cable brackets along the side of the frame. Make sure to provide
a drip loop to prevent stress at the cable connector.
9. Repeat Steps 3 through 8 if you will be using both ports of the drive.
Note: If the drive tray has a second drive, repeat Step 3 through 9.
1. Manual drive tray (two drives installed)
2. CSL drive tray
Note: Only one CSL can be installed
per tray.
3. Port A (Fibre Channel cable)
4. Port B (Fibre Channel cable)
C53822
2
3
3
1 4
4