95741 Sixth Edition 8-1
8
Servicing the Drive
This chapter provides servicing information for the 9840 Tape Drive. It contains:
•“Jammed Cartridge”
•“Clean Tape Path” on page 8-3
•“Clean Fibre Channel Components” on page 8-4
•“Fibre Channel Loop Test” on page 8-8
■Jammed Cartridge
Note: Refer to Chapter 5, “Cartridge Scratch Loader” to remove a jammed
cartridge from a CSL.
A jammed cartridge in a 9840 Tape Drive is not a common malfunction.
However, you must know how to remove jammed cartridges when the
malfunction occurs.
Follow these instructions to remove a jammed cartridge from a drive.
1. Locate the MUD screw on the drive.
Note: The 9840 Tape Drive MUD screw is located on the right-front side of the drive (see
the figure below).
1. MUD screw
C5357
5
1