Subaru Robin Power Products R1200 service manual Hanging posi- tion is not normal Abration

ElSymptoms

--

B-3 Abnormal running

Fluctuation of rpm

Governor weight

Governor sleeve

1.Governor spring is defective

2.Hanging posi- tion is not normal

1.Abration

2.Abnormal operation

bluyylly “I l”Ul path (Mixing rati of air with fuel i! too low)

Clogging or col- laps of fuel path

I I II

1, Gasket failure

2.Clamping is insufficient

1

Check	governor	Check the	Check the fuel
weight	and gover-
		carburetor	path

II

Check the gasket or the clamping torque

I

In case of fitting failure, correct it.

hanging posi- tion is not normal. correct it.

2.In case the governor spring

Is abnormal, replace it.

In case of abration or abnormal opera- tion, adjust or re- place the governor weight and gover- nor sleeve.

In case of fuel path clogging clean the path.

In case of clogging or collapse of the fuel path, clean or adjust it.

1.In case of gasket failure, raplace the gasket

2.In case of clamping torque failure, tighten it more.

I

rl Correct fitting of

Remedies governor and level shaft

Adjust the hanging position of the governor spring or

---7A-
Adjust	or	replace	Clean the fuel		Clean or	replace
the governor
weight	or	the	path		the fuel	path.
governor		sleeve.	I	I	I	.-
					--

I

Replace or tighten the gasket more