9-4-14 MUFFLER AND MUFFLER COVER
(1)Insert the gasket (exhaust) to the studs of the exhaust flange of the crankcase and then mount the muffler. Install the muffler by securing the muffler flange with two brass nuts and the muffler bracket with one M6 x 12 bolt.
(2)Secure the muffler cover with three M6 x 8 flange bolts.
Muffler<??g?g;/M8 | Nut |
. , | ’ |
Muffler Cover
M6x8 Flange Bolt
(3 PCs.1
F&.
9-4-15 AIR CLEANER
In the air cleaner body which is fitted to the carburetor, set the element retainer, element, and cleaner case in this order, and clamp them with M6 x 10 screws.
Note: Installment of the element cover is done after the front cover has been installed.
M6 Flange Bolt
Air Cleaner Case
Element
Fig.
