IISymptoms
I =I
aIgnition coil
aAir gap is too wide.
Sparks do not come out from of the high voltage cord
ilIgnition coil
1.Breaking of wire
2.Short circuit
the tip
LMagneto (Flywheel)
EDemagnetization
Sparks do not come out or are weak when the ignition plug is connected.
plug cap | Ignition plug |
Contact | failure | 1. | Insulation | |
| failure | |||
with the |
|
| ||
| 2. | Carbon deposit | ||
ignition | plug | |||
| or dirt | |||
|
|
| ||
|
|
| I |
I
Checking met hod
Check the air gap
Measure | resistance | Exchange | the | ||
valve | between | the | magneto | with a | |
terminals | with | a | new one | and | |
circuit | tester |
| restart it. |
| |
Check the ignition | Check the ignition |
Plug cap | plug |
Checking criteria
- I
0Remedies
I
I
In case the air gap is too wide, adjust it.
Normal : 0.5mm
Adjust the air gap
In case of
Breaking of wire in case of OS1 .. .
Short circuit
In case of de- magnetization, replace it.
In case contact with the ignition plug is not normal, adjust or replace it.
1.In case of insulation failure, replace the ignition plug.
2.In case of carborn deposit or dirt, clean or replace the ignition
plug.
