●
e
6. SAFETY PRECAUTIONS
1.Use extreme caution near fuel. A constant danger of explosion or fire exists.
Do not fill the fuel tank while the engine is running. Do not smoke or use opem flame near the fuel tank. Be careful not to spill fuel when refueling. If spilt, wipe it and let dry before starting the engine.
2.Do not place inflammable materials near the generator.
Be careful not to put fuel, matches, gunpowder, oily cloth, straw, and any other inflammables near the generator.
3.Do not operate the generator in a roorn,cave or tunnel. Always oPerate in a
4.Operate the generator on a level surface.
If the generator is tilted or moved during use, there is a danger of fuel spillage and a chance that the generator may tip over.
5.Do not operate with wet hands or in the rain.
Severe electric shock may occur. If the generator is wet by rain or snow, wipe it and thoroughly dry it before starting.
Don’t pour water over the generator directly nor wash it with water.
If the generator is wet with water, the insulations will be adversely affected and may cause current leakage and electric shock.
6.Do not connect the generator to the commercial power lines.
This may cause a
NOTE: The patts numbers of the transfer switches and of tie plastic box to store them are as
shown in Table
7
Part No. | Part Name | Q’ty | Phase | Allowable Current | |
Transfer | Switch | 1 | 1 | 15A | |
Transfer | Switch | 1 | 1 | 30A | |
Transfer | Switch | 1 | 1 | 60A | |
Plastic Box | 1 | 1 | 30A | ||
Plastic Box | 1 | 1 | 60A | ||
|
|
| Table |
|
|
7.Use a fuse of the correct capacity. (DC output)
If the generator rpm is increased excessively in the overload condition by using an over rated fuse, the generator may be burnt.
CAUTION : If the fuse is burnt or the circuit breaker tripped off as a result of using an electrical appliance,the cause can be an overload or a
