Step Part to removeDescription:RemarksTool
5. | Staitor | (1) Removethe four bolts which fasten the | 10mm socket |
|
| statorto the rearcover. | wrench |
|
| (SeeFig. |
|
|
| &BOLT | . . . . . .4pcs. |
|
| 60 SPRING | WASHER |
Fig.
(2)Rut a piece of lumber on the floor in upright position.
(SeeFig.
(3)Hold the rearcover and stator upside downwith both hands.
(4)Down the rear cover and stator over the lumber lightly hitting the bottom of rear coverto the top endof lumberto pull out the stator.
(SeeFig.
+NOTES]
1.Apply fingers to statorcoil to keepthe stator from droppingon the floor.
2.Gently hit the bottom of rear cover to the top end of lumber severaltimes until the stator comesout loose.
Fig. | Fig. |
- 57 -