Subaru Robin Power Products RGX2400, RGX5500 manual Rear Cover 1 Removetheendcover. SeeFig. 10-l1

itep Part to remove Description

4.Rear Cover (1) Removetheendcover. (SeeFig. 10-l 1.)

66bolt . . . . . _ . . . . . _ _ . . _4 pcs.

(2)Take off the rearcover.

1.Remove the four bolts which fasten

the rearcoverto the front cover. 6@f,c,lt. . . . . . . . . . . .._.. dpcs.

2. Use a special tool “REAR COVER

IPULLER” to removethe rearcover.

a)Insert the two screwsof the special tool into the thread holes of the rearcover.

b)Apply the center bolt of the special tool on the headof the throughbolt.

c)Tighten the center bolt to pull out the rearcover.

Fig. lo-11

RemarksTool

10 mm spanner 01 box wrench

10 mm spanner01 box wrench

Insertthe two screws sufficiently andevenly, or the threadholemay be damagedat removing.

Fig. lo-12

In the casethat REAR COVER PULLER” is unavailable,removethe rear cover by thefollowing instructions.

2’. Hit on the boss and legs -of rear cover with a plastic hammer to loosen.

Do not give a stronghit	Box wrench
on the bossor legs.	Plastic hammer

Fig. lo-13

- 56 -