1044 REAR COVER
(1)Attach the bushing over the lead wire drawn out from the rear cover.
Press the smaller end of the bushing into the window of the rear cover. (See
Fig.
(2)Put the rear cover with stator over the rotor. Tap on the rear cover evenly with a plastic hammer to press the rotor bearing into the rear cover.
II
Fig.
(3)Fix the rear cover to the adaptor with four bolts, spring washers, and washers.
M6 X 25 mm bolt *.***----..*.. 4 pcs.
M6 spring washer
Tightening torque : 50 - 60
- 63 -