Sun Microsystems 4500/3 manual Cabling the System, 4Cluster Platform Cables

Cabling the System

The Cluster Platform 4500/3 is shipped with the servers, hubs, and each of the arrays already connected in the cabinet. You should not need to cable the system. Refer to FIGURE 2-4for servicing the cables.

This section describes how the Cluster Platform 4500/3 components are cabled when shipped from the factory. The integrated platform provides FC-AL cables connected to the on-board GBICs on the I/O board. Serial cables connect the Ethernet hub to the management server and 10BASE-T ports on the disk arrays.

For specific cabling connections, refer to Appendix C.

TABLE 2-4Cluster Platform Cables

Component	Part Number	Quantity
SCSI cable	530-2834*	4
DB-25/RJ-45 serial cable	2151A	2
Null Ethernet cable	3837A	2
F100 cable	9715A	6
Serial cable	9524A	1
RJ-45 Ethernet cable	1871A	4

*530-2834 is a manufacturing part number.

Caution –Partner pairs are not supported at this time. Do not connect the partner-pair loop cables.

16 Cluster Platform 4500/3 User’s Guide • July 2001