12. From the Sun workstation, access the terminal concentrator:
#telnet 192.212.87.62
Trying 192.212.87.62...
Connected to 192.212.87.62. Escape character is ’^]’ <CR>
Rotaries Defined: cli
Enter Annex port name or number:
Port designations follow:
■Port 1 = management server
■Port 2 = cluster node 1
■Port 3 = cluster node 2
a. Enter the command /usr/openwin/bin/xhost 192.212.87.38 to allow your windows manager to display screens from remote systems.
b. Telnet to the telnet concentrator and select Port 1. The following steps will assist you in the configuration of the management server; at the conclusion of the steps, the management server will reboot, and you will be asked a series of questions to configure the cluster.
c. To terminate the telnet session, type <ctrl]>.
13.Boot the management server from the OBP prompt to start the customization process.
The management server boots into the Open Boot Prom (OBP) environment. The following examples show the customization process. The sample parameters may not fit your specific environment. Note the introduction on each code box, and select the best choice for your environment.
{0} ok setenv auto-boot? true
(0)ok boot disk0
Boot device: /pci@1f,0/pci@1/scsi@8/disk@0,0 File and args: SunOS Release 5.8 Version
Copyright
metainit: unknown: there are no existing databases
Configuring /dev and /devices
